逻辑分析仪 HP1630D HP1631D

厂家: 美国惠普
尺寸: 41×17×40cm
重量: 10Kg

HP1631D 带示波器 50MHz 2CH 200MSa

主要指标 100MHz 43通道

The 1630D Logic Analyzer has also been called the "general purpose tool for the modern designer" and for good reason! State listings and waveforms provide displays and windowing of address, data, status, and control line activity. Selectable display modes include binary, octal, decimal, hexadecimal, ASCII, relocation, user-defined mnemonics, and microprocessor-specified mnemonics.

43 channels
State Analysis: 25MHz, 1 k memory, 3 clocks, demultiplexing
Timing Analysis: Speeds up to 100MHz, 16 channels, Glitch triggering
Complete programmable control, includes HP-IB & HP-IL

The HP 1630 series of logic analyzers consists of 3 models designed to meet the needs of digital design and test engineers. The A & D model differ only in channel width - the HP1630A has 35 channels - and the HP 1630D has 43 channels. The HP 1630G has 65 channels, and additional system performance features for time tagging, time-positional charting, and module linkage histograms.

State listings and waveforms provide displays and windowing of address, data, status and control line activity. Selectable display modes include binary octal, decimal, hexadecimal, ASCII, relocation, user-defined mnemonics and microprocessor specific mnemonics. You can assign labels and display and/or trigger on code in terms of re-locatable or absolute addresses or mnemonics.

25 MHz speed
Up to 65 channels (HP1630G)
1K memory
Three clocks
Demultiplexing
Full compare mode

The HP 1630D facilitates hardware analysis and debug of 16-bit microprocessors. The HP 1630A's measurement capability is also available in the HP 1630D, but with additional state and timing channels to meet the needs of 16-bit microprocessors. Total channel count is increased to 43, where eight or 16 of the channels can be used for high-speed timing analysis. Glitch triggering and capture are also increased to eight channels.

In addition to triggering on channels from one to 16 channels wide, you can define a simultaneous occurrence of a pattern and positive or negative edge to assure data registration precisely on entering or exiting the specified pattern. You can also specify a pattern or a glitch on one or more channels. You can trigger on just edges or glitches, and you can define the valid pattern duration.

X and O cursors can be moved anywhere on or off screen. You can magnify the trace around either cursor for greater visual resolution. Time intervals are displayed on-screen, independent of magnification and sample period.

咨询电话: 132- 4173- 5460 , 邮箱: 52634729@QQ.com