后面板300 MHz/2mV/2ns 双通道
厂家: 美国泰克
300MHz,250MSa/s,2ch
The Tektronix 2432A oscilloscope is a graph-displaying device it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Tektronix 2432A oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the oving parts?of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
| Form Factor | Benchtop |
| Bandwidth | 300 MHz |
| Number of Channels | 2 ch |
| Simultaneous Channels | 2 ch |
| Simultaneous Maximum Sampling Rate/ch | 250 MSa/s |
| One ch. only max. sampling rate | 250 MSa/s |
| Max. Single Shot bandwidth | 100 MHz |
| Max. Record Length | 1024 pt/sec |
| Min. Vertical Sensitivity | 2 mV/div |
| Maximum Vertical Sensitivity | 5 V/div |
| Rise time | 1.1667 ns |
| Number of Bits | 8 bits |
| Input Impedance | 1 MOhm |
| Input Impedance (alternate) | 50 Ohm |
| Input Coupling | AC,DC,GND |
| Maximum Input Voltage | 400 Vrms |
| Maximum Input#2 (for Impedance #2) | 5 Vrms |
| Main time base - lowest | 2 ns/div |
| Main time base - highest | 5 s/div |
| Timebase accuracy | .0015 % |
| Trigger Source | External,Internal |
| Minimum Glitch Trigger | 2 ns |
| Display Type | CRT Monochrome |
| Display Size | 12.7 cm |
咨询电话: 132- 4173- 5460 , 邮箱: 52634729@QQ.com
