带宽 (probe only) |
≥1.5 GHz |
衰减 (probe only) |
10x ±2% |
上升时间 (probe only) |
≤267 ps |
Input Capacitance |
<1 pF |
Input Resistance |
1 MΩ |
线性动态范围 |
±8 V (16 Vp-p) |
输入偏置范围 |
±10 V |
最大输入电压 (nondestruct) |
±15 V (DC + peak AC) |
Propagation Delay |
5.3 ns |
线长 |
1300mm |
电源要求
TAP1500 is powered directly by the DPO7000 and DPO/MSO4000 Series
Oscilloscopes using TekVPI probe interface.
推荐示波器
DPO7000 and DPO/MSO4000 Series Oscilloscopes with TekVPI™ probe
interface.
特点
- Outstanding Electrical Performance
- ≥1.5 GHz Probe Bandwidth
- <267 ps Rise Time
- ≤1 pF Input Capacitance
- 1 MΩ Input Resistance
- -8 V to +8 V Input Dynamic Range
- -10 V to +10 VDC Input Offset Range
- Versatile Mechanical Performance
- Small Compact Probe Head for Probing Small Geometry Circuit
Elements
- DUT Attachment Accessories Enable Connection to SMDs as
Small as 0.5 mm Pitch
- Robust Design for Reliability
- Easy to Use
- Connects Directly to DPO7000 and DPO/MSO4000 Series
Oscilloscopes Using the TekVPI™ Probe Interface
- Provides Automatic Units Scaling and Readout on the
Oscilloscope Display
- Easy Access to Oscilloscope Probe Menu Display for Probe
Status/Diagnostic Information, and to Control Probe DC Offset
应用
- High-speed Digital Systems Design
- Component Design and Characterization
- Manufacturing Engineering and Test
- Educational Research
- Signals with Voltage Swings up to 16 Vp-p
TAP1500 Single-ended Active FET Probe provides excellent high-speed
electrical and mechanical performance required for today’s digital
system designs. Specifically designed for use and direct connection to
the TekVPI™ probe interface used on Tektronix' new DPO7000 and
DPO/MSO4000 Series Oscilloscopes, the TAP1500 Active FET probe achieves
high-speed signal acquisition and measurement fidelity by solving three
traditional problems:
- Lower DUT loading effects with ≤1 pF input capacitance and 1 MΩ
input resistance
- Versatile DUT connectivity for attaching to small SMDs
- Preserves oscilloscope bandwidth at the probe tip for DPO7000
and DPO/MSO4000 Series Oscilloscope models, up to 1 GHz
性能指标
带宽 (Probe only) - TAP2500 ≥2.5GHz TAP3500 ≥3.5GHz
衰减 (Probe only) - 10:1.
上升时间 (Probe only) - TAP2500 <140ps. TAP3500 <130ps.
Input Capacitance - ≤0.8 pF.
Input Resistance - 40 kΩ.
输入动态范围 - -4 V to +4 V.
输入偏置范围 - -10 V to +10 V.
最大输入电压 (Nondestruct) - ±30 V (DC + peak AC).
Propagation Delay - 5.3 ns.
线长 1300mm
电源要求
TAP2500 and TAP3500 are powered directly by the DPO7000 and DPO4000
Series Oscilloscopes using TekVPI™ probe interface.
推荐示波器
- DPO7000 and DPO4000 Series Oscilloscopes with TekVPI™ probe
interface.
特点
- Outstanding Electrical Performance
- High Probe Bandwidth
- Fast Probe Rise Time
- Excellent Signal Fidelity
- ≤0.8 pF Input Capacitance
- 40 kΩ Input Resistance
- -4 V to +4 V Input Dynamic Range
- -10 V to +10 VDC Input Offset Range
- ±30 V (DC + peak AC) Max Input Voltage (Nondestruct)
- Versatile Mechanical Performance
- Small Compact Probe Head for Probing Small Geometry Circuit
Elements
- DUT Attachment Accessories Enable Connection to SMDs as Small as
0.5 mm Pitch
- Robust Design for Reliability
- Easy-to-Use
- Connects Directly to DPO7000 and DPO4000 Series Oscilloscopes
Using the New TekVPI™ Probe Interface
- Provides Automatic Units Scaling and Readout on the
Oscilloscopes Display
- Easy Access to Oscilloscope Probe Menu Display for Probe
Status/Diagnostic Information and to Control Probe DC Offset
应用
- Verification, Debug, and Characterization of High-speed Designs
- Signal Integrity, Jitter, and Timing Analysis
- Manufacturing Engineering and Test
- Signals with Voltage Swings up to 8 Vpk-pk
Selecting the right probe for your application is key to attaining the
best signal fidelity in your measurements. Active probes provide truer
signal reproduction and fidelity for high-frequency measurements. With our
ultra-low input capacitance and unique interface, the TAP2500 and TAP3500
Single-ended Active FET probes provide excellent high-speed electrical and
mechanical performance required for today’s digital system designs.
Specifically designed for use and direct connection to the TekVPI™ probe
interface used on the DPO7000 and DPO4000 Series oscilloscopes, the TAP2500
and TAP3500 Active FET probes achieve high-speed signal acquisition and
measurement fidelity by solving three traditional problems:
- Lower DUT loading effects with ≤0.8 pF input capacitance and 40 kΩ
input resistance
- Versatile DUT connectivity for attaching to small SMDs
- Preserves oscilloscope bandwidth at the probe tip for DPO7000 and
DPO4000 Series Oscilloscope models up to 3.5 GHz