数字示波器 DL4200 / DL4100

日本横河 300x220x427mm 15kg

DL4200 带宽300MHz (DL4100 带宽150MHz)

全四通道 采样率100MSa/s 记录长度100k 通讯接口IEEE-488 本机自带热敏打印机

The Yokogawa DL4200 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

The Yokogawa DL4200 oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

Bandwidth 带宽 300 MHz (DL4100: 150MHz)
Number of Channels 通道数量 4 ch
Simultaneous Channels 4 ch
Simultaneous Maximum Sampling Rate/ch 100 MSa/s
One ch. only max. sampling rate 100 MSa/s
Max. Single Shot bandwidth 40 MHz
Max. Record Length 100k pt/sec
Min. Vertical Sensitivity 2 mV/div
Maximum Vertical Sensitivity 5 V/div
Rise time 1.167 ns (DL4100: 2.33 ns)
Number of Bits 10 bits
Input Impedance 1 MOhm
Input Impedance (alternate) 50 Ohm (DL4100无)
Input Coupling AC,DC,GND
Maximum Input Voltage 250 Vrms
Maximum Input#2 (for Impedance #2) 5 Vrms
Main time base - lowest 2 ns/div
Main time base - highest 50 s/div
Timebase accuracy 时基精度 0.005 %
Trigger Source 触发源 External,Internal
Trigger Modes 触发模式 Auto,Edge,Gate,Normal,Single,TV ( NTSC,PAL,HDTV )
Trigger Sensitivity 触发灵敏度 1 mV
Display Type 显示屏类型 CRT
Display Size 显示屏尺寸 25.4 cm
Display modes 显示模式 Split,Zoom
External Video Out Yes

咨询电话: 132- 4173- 5460 , 邮箱: 52634729@QQ.com